JSC «Energoprogress»

JSC «Energoprogress&r= aquo;

Commercial offer for=

supply equipment

JSC «Energoprogress» offers for your attention the follo= wing assortment of equipment for ore mining and processing enterprise, heat and power plants, cement plants and refractory plants:

I. Con= veyor belt

JSC Energoprogress is the official dealer of such = big manufacture of conveyor belt as OJSC Ural Plant of Industrial Rubber Produc= ts. Belts produced by this plant are applied on many enterprises of CIS and oth= er countries for conveying of different types of lump, bulk and piece loads: f= rom ferrous and nonferrous metal ores, hard rocks, coal and dolomite to low abrasive or nonabrasive materials.

Depending on transported material and operation conditions JSC Energoprogress has an ability to supply non-flammable belt (= for coal mines), fire-resistant, heat-resistant, oil-resistant, oil-and-heat-resistant of 2MCT type, frost-resistant, food and general-purp= ose with width from 100 – 3 000 mm and plies from 2 to 8.

The belts produced on the basis of TK polyamide tissues and ТЛК and EP polyester and polyamide tissues. Polyamide fabric of TK type as well as polyester-polyamide fabric of TПК and EP types is used for manufactur= e of conveyor belt.

Fire-resistant rubber-fabric conveyor belt is certified by UkrSEPRO State Certificati= on system and permitted by Gospromgornadzor (State Mining Inspection) of Ukraine, license No. 423.06.30-29.52.1.

JSC “Energoprogress” pro= pose for supply high strength rubber-fabric conveyor belts having design strengt= h up to 2500N/mm which are intended for operation in severe and medium conditions for substitution for steel cord conveyor belts such as РТЛ-1500, РТЛ-2500, РТi= 1; ТВ-1500, РТЛ ТВ-2500, Р = 58;ЛШТС-1500, РТЛШТС-2500. The belts are designed on = the base of polyester-polyamide fabric ТЛК (analogue of ЕР fabric). These belts have high strength and impact resistanc= e, sufficient troughability and excellent bond str= ength between construction components. Advantageous of rubber fabric belts in comparison to steel cord are the following: enhanced elasticity and flexibility, reduced belt weight (up to 25-30% in comparison to steel cord belts), resulting in electric power economy when operating, reducing risk of belt combustion (in case of steel cord conveyor belt failure arcing of steel cord may occur). <= /span>

II. Ch= ains

JSC Energoprogress has opportunity to supply hinged (cast and welded) chains of oval and round loops manufactured by leading Russian manufacturers designed= for thermal screens of rotating kilns. The chains have high corrosion resistanc= e in conditions of being effected with high temperature gas flow and chemically aggressive sludge with its abrasive properties.

= ;

J= SC &laq= uo;E= nergoprogress&raq= uo; offers chains of the following ty= pes:

• Normal heat-resistant welded chains of ЦОН25<= span class=3DSpellE>х120/ЦКН25х100 type, material 3 сп/пс, heat resistance up to 550°С

• Welded heat-resistant chains of ЦО&#= 1046;25<= span class=3DSpellE>х120/ЦКЖ25х100 type, material 40X, = heat resistance up to 800°C

• Welded heat-resistant chains of ЦО&#= 1046;25<= span class=3DSpellE>х120 type, material 08X17= T, heat resistance from 850 to 900°C

• Cast heat-resistant chains of ЦО&#= 1046;Л25<= span class=3DSpellE>х120 type, material 35Х23Н10<= span style=3D'font-size:10.0pt;line-height:140%;font-family:Arial;color:#333333; mso-bidi-font-weight:bold'>СЛ/20Х27Н4СЛ, heat resistance from 9= 00 to 1100°C<= /st1:metricconverter>

• Cast heat-resistant chains of ЦО&#= 1046;Л25<= span class=3DSpellE>х120 type, material 25Х25Н6Г9С = 51;, heat resistance up to 1200°C

• Normal heat-resistant cast chains of Ц = 54;НЛ 25= х120 type, material 30ХГСЛ/40ХСЛ= , heat resistance from 200 to = 700°C.

The chains supplied by JSC Energoprogress comply with operation requirements:

- temperature;

- correlation between their surface and weight;

- application of chains for cleaning furnace and advancing raw materials within surface.

= ;

Applied technology allows casting single piece chains of various lengths without any weld seams, choosing the most rational form, section and loop configuration thus maximally increasing active heat exchange and dust catching surface, as well as service life.

III. Mill liner

JSC Energoprogress offers for delivery metal and rubber liners of leading world manufacturers. Ball mill liner is designed for protection of mill body and = end covers from abrasion wear, and also for increase of the efficiency of mater= ial grinding. Steel liner is made of wear-resistant steel, and it can be applied both by wet and dry grinding mode, and without limitation of grinding media. Rubber liner operates safely, and its application is economically efficient when it is used in ball mills with wet mode of production, under working temperature not exceeding 80ºС, and the balls with diameter not exceeding 60 mm or combination of the balls Ø 60 and Ø 80 (50х50%) are charged.

= ;

Rubber mill liner =

In view of= the increased demand of industrial enterprises in reduction of energy consumpti= on and production costs, JSC Energoprogress offers for delivery cast rubber li= ner of leading Russian and foreign manufacturers that allows to solve said problems.

= ;

Advantages of the rubber liner against steel one: =

• The liners are 5 times lighter that steel ones; this reduces power consumption = for idle running of the mill and due to low stress on bearings of the mill;

• Liners have a small thickness and this increases volume of the mill by 3-5%, these facts allows to increase output per finished rate (5-10%);

• Rubber liners provide perfect abutment to the body, sealing of the joints and fixtures; this avoids leakage of pulp beneath the lining and through boltings;

• Mills are transferred from cascade to cascade-and-waterfall mode as a result of application of «lifter and plate» construction that increases grinding efficiency;

• Reduction of the wear of grinding media;

• Due to application of the rubber lining noise level of the mill reduces 2 times= ;

• Lifetime increase;

• Significant reduction of the labor intensiveness for mounting of the liners;

• Rubber liner of «lifter and plate» type does not require an overhaul maintenance during rated operational lifetime; <= /p>

• Minimal danger of injury during mounting and dismantling.

<= o:p>

S= ervices rendered:

Liners are designed in close co-operation with our customers, to meet their need and to solve individual tasks. Each set of liners is supplied together with detail= ed erection manuals. We provide technical support during mounting, sending of experienced supervision engineer for the whole period of mounting.

= ;

Enterprises that use rubber liner: <= /span>OJSC South= ern ore mining and processing enterprise, Ukraine; OJSC Kr= amatorsk Cement Plant Pushka, Ukraine; OJSC Balcem, Ukraine; OJSC Mikhaylovs= kiy ore mining and processing enterprise, Russia; OJSC Leb= edinskiy ore mining and processing enterprise, Russia; OJSC Amu= r Artel, Russia; Fosforit, Russia; CJSC Sibirskiye Re= sursy, Russia; OJSC Ural Cement, Russia; JSC Sokolovo-Sarbays= koye mine and industrial association, Kazakhstan; Mining Plant Nurdaulet, Kazakhstan and 80% of o= re mining and processing enterprise in Europe.

= ;

Metal mill liner <= /u>

This type = of liners is applied for lining of ball-tube mills of ore mining and processin= g enterprise, heat and power plants, cement plants and refractory plants. Grinded raw materials are ore, coal, clinker, limestone, cement etc. Metal liners can be made with two ways of manufacture: casting into loum and sand mouldings; hot rolling way.=

= ;

Armored lining plates, steel mould, = with increased manganese content 110Г13Л=

Moulds are manufactures on the base of drawings provided by customer technical specifications and rated weight of the component. Steel moulds undergo ther= mal treatment subject to the requirements set forth in design documents. The produesion of the moulds as per drawings of manufactu= rer is also possible.

= ;

Rolled metal liners

Chemical composition of steel:

grade of steel	С	Mn	Si	P	S	Cr	Al	V
75Г2ФЮ	0,710-0,800	1,200-1,800	0,170-0,370	up to 0,035	up to 0,040	up to 0,300	0,050-0,300	0,050-0,100
75Г2Ф	0,650-0,750	1,200-1,800	0,170-0,330	up to 0,040	up to 0,040	up to 0,250	-	0,040-0,120
75Г2	0,650-0,750	1,200-1,800	0,170-0,330	up to 0,040	up to 0,040	up to 0,250	-	-

IV. Products delivered under Customer Enquiries:

· Rubb= er pipes and other rubber products;

· Bridge and gantry cranes and accessories thereto;

· СМЦ 611 apron conveyors;

· ПТК drying drums;

· Shells, thickness from 20 to 100mm, diameter up to 5m reducers of different types;<= o:p>

· Reducers of different types;

· Gear rings, bands;

· Heat-resis= tant castings;

· Roller supports for rotating kilns;

· Clamshell buckets.

In<= span lang=3DX-NONE style=3D'font-size:10.0pt;line-height:140%;font-family:Arial; color:#333333;mso-ansi-language:X-NONE'> case <= span class=3DSpellE>if you are interested in our proposition and ready for European level of cooperation when you expect juridical guarantees providing from the supplier, we would like to ask you to refer to our expert and define basic cooperation stages. We are always ready to provide you with attested results of performed projects and will include your company to this list with a great pleasure.

Best regards,

Chairman of the Board

JSC Energoprogress = &nb= sp; = &nb= sp; = &nb= sp; = Mr. O. Degtyaryov

<= o:p>